CATALOGUE release 8.7

287 / 1144

Products designed for industrial applications.
General terms and conditions for sale are available on
Series 50 cylinders CATALOGUE
1
/8.05.01 1
> Release 8.7 MOVEMENT >
MOVEMENT
Series 50
rodless cylinders
Double-acting, magnetic, cushioned
ø16, 25, 32, 40, 50, 63, 80
Series 50 rodless cylinders are available
in 7 different diameters to cover as
many applications as possible. A
permanent magnet is assembled on
the cylinder piston allowing the position
to be detected by means of proximity
switches positioned on the sliding axis.
This series of cylinder is normally
supplied with end-stroke cushioning,
that can be regulated by means of a
screw located on the end-cover.
The Series 50 cylinders are
recommended to be used according
to the load values and torque forces
detailed in the relative tables.
» » Four ports on each chamber
» » Possibility to supply
both chambers from
one side (on request)
GENERAL DATA
Type of construction rodless with integral carriage
Operation double-acting
Materials end-covers, piston and barrel = AL
seals = PU and NBR
Operating temperature 0°C ÷ 50°C(with dry air - 10°C)
Operating pressure 1 ÷ 8 bar
Speed 10 ÷ 1000 mm/sec (without load)
Fluid clean air, without lubrication
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Strokes min - max for all bores 100 ÷ 4000 mm
Stroke tolerance strokes ≤ 1000 mm = 0 / +0,6 mm
strokes > 1000 mm = 0 / +3 mm
Type of mounting foot mounted