CATALOGUE release 8.8

1012 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series MD lubricators CATALOGUE
3
/3.25.01 3
> Release 8.8 TREATMENT >
TREATMENT
Series MD
lubricators
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or
integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
The lubricator allows the nebulization of
lubricating oil which is necessary to the
functioning of components in specific
conditions of use.
By means of a regulation screw the
amount of oil can be properly adjusted in
order to avoid unnecessary overdoses.
» » Regulation screw
» » Ability to refill the oil even
with system under pressure
» » High flow
» » Check of the oil level through
plastic cover openings
»
» Bowl locking system reducing
the risk of accidents
» » Additional air intakes with
the same characteristics
of the outlet air (line)
GENERAL DATA
Construction modular, compact
Materials see TABLE OF MATERIALS (pag. 3/0.25.02)
Ports with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø
6, 8 and 10 mm
Oil capacity 40 cc
Oil refilling even during use
Mounting in vertical position by means of through holes in the body
Operating temperature -5°C ÷ 50°C up to 16 bar
Oil for lubrication use ISO VG32 oils. Once applied, the lubrication should never be interrupted.
Operating pressure 0 ÷ 16 bar
Min. air consumption for lubrication at 1 bar 15 Nl/min
Min. air consumption for lubrication at 6 bar 25 Nl/min
Nominal flow see FLOW DIAGRAMS (pag 3/0.25.03)
New