CATALOGUE release 8.8

26 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series 40 cylinders CATALOGUE
1
/1.10.01 1
> Release 8.8 MOVEMENT >
MOVEMENT
Series 40 cylinders
Double acting, cushioned, magnetic
Ø 160 - 200 - 250 - 320 mm
Series 40 cylinders have been designed
in compliance with ISO 15552 standards
and with the previous DIN/ISO 6431 -
VDMA 24562 standards.
A permanent magnet on the piston of
these cylinders is able to send, through
proximity switches mounted on the
cylinder sliding axis, electrical signals to
indicate its position.
This series is normally equipped with
end-stroke cushioning which can be
adjusted through a screw on the end
block.
In order to quieten the impact of the
piston on the end block, these cylinders
are also equipped with mechanical
cushioning.
» » In compliance with ISO
15552 standards and with
the previous DIN/ISO 6431
- VDMA 24562 standards
» » Adjustable pneumatic
cushioning
» » Rolled stainless steel
rod (Ø 160 - 200 mm)
» » Chrome plated steel rod
(Ø 250 - 320 mm)
»
» Rod scraper in brass
GENERAL DATA
Type of construction with tie-rods
Operation double-acting
Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod,
zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts,
NBR-PU rod - piston - cushion seals
brass rod scraper
Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination
Strokes min - max 10 ÷ 2500 mm
Operating temperature 0°C ÷ 80°C (with dry air -20°C)
Operating pressure 1 ÷ 10 bar
Speed 10 ÷ 500 mm/sec (without load)
Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should
never be interrupted.