CATALOGUE release 8.8

273 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
1
Series CGSN 180° angular grippers MOVEMENT > CATALOGUE > Release 8.8
/7.12.01 1
MOVEMENT
Series CGSN
180° angular grippers
Magnetic
Sizes: ø 16, 20, 25, 32 mm
A permanent magnet within the gripper is able to send, through proximity switches
(Series CSC and CSD) inserted in the grooves on the body, electrical signals to indicate
the position of the gripping fingers.
The link mechanism used ensures a high gripping force.
Series CGSN grippers guarantee precision
and flexibility during installation. Each
gripper has calibrated holes on the base
and side for very precise positioning.
Installation is made even easier due to the
availability of male and female mounting
brackets (Mod. C-CGP female or L-CGP
male).
» » High flexibility during
installation
» » Steel gripping fingers
resistant to corrosion
» » Wide working area
GENERAL DATA
Operation double effect
Working pressure 2 bar ÷ 8 bar
Working temperature 5°C ÷ 60°C
Max operating frequency 100 cylcles/min
Lubrication lubrication is required on sliding section only
Lever open/close angles -1° / + 180° (tolerance ±3°)
Repeatability ± 0.2 mm
Air ports M5x0.8
Fluid Filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISO VG32. Once applied,
lubrication should never be interrupted.
Bore sizes (mm) 16 20 25 32
Weight(g) 140 255 430 740
Theoretical gripping moment [M] (N·mm) 1230xP 2350xP 4540xP 9680xP [ P = pressure (MPa) ]
Max length of gripping point [L] (mm) 80 100 120 140
Effective gripping force [F] (N) F = M/L x 0.9 (value with the fingers in parallel position)
Example with P = 0.5MPa and L max F = 7N F = 10N F = 17N F = 30N
New version