35 / 1278
Products designed for industrial applications.
General terms and conditions for sale are available on
www.camozzi.com.1
Series 41 cylinders
MOVEMENT >
CATALOGUE
>
Release 8.8
/1.15.01
1
MOVEMENT
Series 41 cylinders -
Aluminium profile
Double-acting, cushioned, magnetic
ø 160 - 200 mm
Series 41 cylinders with bores 160 and
200mm have been designed so as to
comply with the dimensions laid down
in the DIN/ISO 6431 standards. The
extruded aluminium tube in this series is
regarded as very aesthetically pleasing.
The mounting brackets used on the end-
blocks tube are designed in an extremely
secure way, making use of the cylinder
tie-rods positioned internally and not
visible on the assembled cylinders. This
cylinder series is normally equipped with
adjustable cushioning.
Moreover, to reduce the noise of the
impact of the piston and end-caps,
these cylinders are equipped with a
mechanical cushioning.
»
»
In compliance with DIN/ISO
6431/VDMA 24562 standards
»
»
Rolled stainless steel rod
»
»
Adjustable pneumatic
cushioning
»
»
Rod scraper in brass
GENERAL DATA
Type of construction with tie-rods
Operation
double-acting
Materials
AL end blocks and piston - rolled stainless steel AISI 420B piston rod - zinc-plated steel piston rod nut - anodized AL-profile tube
zinc-plated steel tie-rods and tie-rod nuts - NBR rod - piston - cushion seals - brass rod scraper
Mounting
with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination
Strokes min - max
10 ÷ 2500 mm
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure 1 ÷ 10 bar
Speed
10 ÷ 500 mm/sec (without load)
Fluid
filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32.
Once applied the lubrication should never be interrupted.