CATALOGUE release 8.8

60 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series 61 cylinders CATALOGUE
1
/1.25.01 1
> Release 8.8 MOVEMENT >
MOVEMENT
Series 61 cylinders -
Aluminium profile
Single and double-acting, magnetic, cushioned
Standard, low friction, low temperatures and tandem versions
ø 32, 40, 50, 63, 80, 100, 125 mm
Series 61 cylinders have been designed
to comply with the dimensions laid
down in the ISO 15552 standards.
A permanent magnet, mounted on
the piston in these cylinders, enables
information to be received regarding the
piston position by means of proximity
switches mounted in grooves along the
cylinder profile. These grooves can be
covered with a slot cover profile.
This cylinder series is equipped with
adjustable end-stroke cushioning.
Moreover, they are equipped with a
mechanical cushioning in order to reduce
the impact of the piston as it reaches the
end of the stroke.
» » In compliance with ISO
15552 standards and with
the previous DIN/ISO 6431
- VDMA 24562 standards
» » Rolled stainless steel rod
» » Clean design with adjustable
pneumatic cushioning
» » Available special versions
TANDEM:
»
» Double thrust and
traction forces
LOW FRICTION:
» » Friction force
reduced by over 40%
LOW TEMPERATURE:
» » Versions for -40°C
and for -50°C
G VARIANT FOR DUSTY
APPLICATIONS:
»
» Highly resistant to dust,
cement, resin, mud
and wood residue
GENERAL DATA
Type of construction with tie-rods (inside the profile)
Operation double-acting, single-acting, tandem. Low friction version: double-acting only.
Materials standard: AL end-blocks and piston, rolled stainless steel AISI 420B rod, anodized AL profile tube,
zinc-plated steel tie-rods and tie-rod nuts, PU seals;
low friction: standard materials with NBR piston seal and NBR rod seal (FKM rod seal on request)
low temperature: standard materials with chrome plated stainless steel AISI 420B rod, brass rod scraper ring,
stainless steel AISI 303 nuts, stainless steel AISI 420B tie-rods, PU piston seals and NBR rod seal
Type of mounting with front / rear flange, foot mounting, with front / rear / centre / swivel trunnion
Stroke min - max 10 ÷ 2500 mm
Operating temperature standard and low friction: 0°C ÷ 80°C (with dry air -20°C)
low temperature (-40°C version): -40°C ÷ 60°C (with dry air -40°C)
low temperature (-50°C version): -50°C ÷ 60°C (with dry air -50°C)
Operating pressure 1 ÷ 10 bar (standard and low temperature); 0,1 ÷ 10 bar (low friction)
Speed 10 ÷ 1000 mm/sec, no load (standard and low temperature); 5 ÷ 1000 mm/sec, no load (low friction)
Fluid filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once
applied the lubrication should never be interrupted.