CATALOGUE release 8.8

639 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
2
Series F valve islands CONTROL > CATALOGUE > Release 8.8
/3.35.08 2
CONTROL
Thanks to a fixing clip the cartridge fittings can be substituted
with another one according to the size of the tube that has to
be connected: Ø4, Ø6 and Ø8 for solenoid valves and Ø8, Ø10
for supply and exhaust plates.
INTERCHANGEABLE CONNECTIONS
The solenoid valves Mod. M are equipped with an electrical
board using a single signal. This enables to take full advantage
of the characteristic of the Sub-D connector being able to
connect up to 24 monostable valves.
To avoid that, in case of a change in the valve island,
the addresses of the electrical coils positioned after the
modification would change too, for example by replacing a
monostable valve with a bistable one, the version with Cod. D
is available and corresponds to a monostable valve equipped
with a board that occupies two electrical signals.
The free position Cod. L is also available in the Z and W
versions.
Cod. L: free position, no electrical signals are used
Cod. Z: free position with board
with 1 electrical signal (not used)
Cod. W: free position with board
with 2 electrical signals (not used)
Cod. M: 5/2-way monostable valve with board
with 1 electrical signal
Cod. D: 5/2-way monostable valve with board
with 2 electrical signals (one is not used)
TYPE OF BOARDS ON INTERMEDIATE PLATES