727 / 1278
Products designed for industrial applications.
General terms and conditions for sale are available on
www.camozzi.com.2
Series CX multi-serial module
CONTROL >
CATALOGUE
>
Release 8.8
/3.50.04
2
CONTROL
CPU Module - Characteristics
It is a slave node of the main PROFIBUS, CANopen, DeviceNet, EtherNet/IP, EtherCAT, PROFINET network and the Master module
of the subnet. All modules provided can be connected only on the right side of the CPU module, like the digital/analog inputs/outputs,
direct interface modules for the valve islands (Series F, HN and 3) and the initial module of the subnet.
It has its own M12 A 4 pin male connection to supply the modules connected, distinguishing both logic supply and power supply.
Two M12 connections for Bus-IN and Bus-OUT of the main network, which M12 connection will take over the relative specifications
according to the choosen protocol.
The addressing is performed by means of the Rotary Switch for the protocols with this feature, while for Ethernet protocols addressing
is performed by means of the protocol itself. Leds indicate the working state. A maximum number of 1024 inputs and 1024 outputs can
be managed.
Expansion Module - Characteristics
At its right side, different modules can be connected like the digital/analog inputs/outputs, the direct interface modules for the valve
islands (Series F, HN and 3) and the initial module of the subnet to re-amplify it or to create new branches. It has its own M12 A 4 pin
male connection to supply the devices connected, distinguishing both logic supply and power supply. It has two M12 D 5 pin female
connections for Bus-IN and Bus-OUT connection of the subnet. Leds indicate the working state.
The valve island equipped with Expansion Module can be used only in presence of a subnet.