809 / 1278
Products designed for industrial applications.
General terms and conditions for sale are available on
www.camozzi.com.2
Series GSCU, GMCU, GSCO, GMCO valves
CONTROL >
CATALOGUE
>
Release 8.8
/7.15.01
2
CONTROL
Series GSCU, GMCU, GSVU, GMVU,
GSCO, GMCO flow control valves
Unidirectional and bidirectional banjo flow controllers with nominal
diameter 1,5 - 3,5 - 5 mm
Ports: M5, G1/8 and G1/4
These unidirectional and bidirectional
flow controllers have been designed as
small as possible to enable mounting
directly on valves or cylinders.
The flow regulation range is wide and
gradual, allowing the regulation to be
very accurate either at minimum or
maximum flow.
GENERAL DATA
Construction
needle - type
Valve group
unidirectional and bidirectional controller
Materials
body and screws M5 inox; 1/8 - 1/4 - 3/8 - 1/2 OT58 seals NBR
Mounting
by male threaded
Installation
in any position
Operating temperature 0°C ÷ 80°C (with dry air -20°C)
Operating pressure 1 ÷ 10 bar
Nominal pressure
6 bar
Nominal flow
see graph
Nominal diameter
M5 = 1.5 mm - G1/8 = 2 mm - G1/4 = 4 mm G3/8 = 7 mm - G1/2 = 12 mm
Fluid
filtered air