215 / 226
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
205
T E C H N I C A L D A T A
5
Series E - Packed Spool Construction,
Manifold Assembly
5-way/2-position, 5-way/3-position -
Center Closed, Center Open/Exhausting,
& Pressure Center
** All Series E valves offer a balanced packed-spool design. This design permits a custom-
ized seal geometry to be fitted onto the spool directly. Benefits are less vulnerability to
“varnishing" and/or contamination due to smaller seal contact area with the valve bore.
Maintenance is reduced due to less parts and labor required to repair, while providing
increased seal life and leak-free performance.
Series E - Packed Spool Construction,
In-line Assembly
5-way/2-position, 5-way/3-position -
Center Closed, Center Open/Exhausting,
& Pressure Center
Series A / Series 6 - Directly Operated Solenoid
valve with M5 (10-32 UNF), 1/8" ports, or
4mm OD (5/32" OD tube)
2-way/2-position Normally Closed, (shown
with coil De-Energized)
Series A / Series 6 - Directly Operated Solenoid
valve with M5 (10-32 UNF), 1/8" ports, or
4mm OD (5/32" OD tube)
2-way/2-position Normally Open,
(shown with coil De-Energized)
Series NA (NAMUR Interface)- Packed-Bore Spool
Construction
3-way/2-position Normally Closed, 3-way/2-
position Normally Open, 5/2, 5/3 Center
Closed, 5/3 Center Open/Exhausting, 5/3
Pressure Center
** All Series NA-NAMUR valves
are equipped with flat geometric
ring seals in the packed bore
construction, (A wider flat edged
portion of the seal ring seals
against the external packing spac-
ers and valve inner body, while a
thinner rounded lip seals against
the spool surface). The design
offers significantly improved seal-
ing over traditional o-rings or oval
rings, especially between differing
surface geometries, such as spools
and packing glands.
Series VNR, SCS & VSC Valves - Poppet Design
Check, Shuttle, and Quick-Exhaust Valves