CATALOGUE release 8.8

100 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series 63 cylinders CATALOGUE
1
/1.28.01 1
> Release 8.8 MOVEMENT >
MOVEMENT
Series 63 cylinders -
Aluminium tube and profile
Single and double-acting, magnetic, cushioned
Versions: standard, low friction, high and low temperatures
ø 32, 40, 50, 63, 80, 100, 125 mm
The new Series 63 pneumatic cylinders,
which comply with the ISO 15552
standard, have been developed to
guarantee high performance whilst also
offering significant reductions in weight.
The new adjustable pneumatic and
mechanical cushioning system ensures
Series 63 also reduces the noise caused
by the impact of the piston on the end
block.
On one side of the profle, there are
grooves for the positioning of proximity
switches (Series CSH) for the detection
of the piston’s position. These grooves
can be covered with the slot cover
profile Mod. S-CST-500. A wide range
of versions are available which makes
these new cylinders suitable for use in
many sectors and applications.
» » In compliance with ISO
15552 standards and with
the previous DIN/ISO 6431
- VDMA 24562 standards
» » Clean design
» » Weight reduced by 25%
» » Adjustable pneumatic
and mechanical
end-stroke cushioning
»
» Wide range of installation
accessories
» » Rolled stainless steel rod
WIDE RANGE OF
VERSIONS AVAILABLE:
» » Low friction
»
» High and low temperatures
» » Dusty environments
» » ATEX
GENERAL DATA
Type of construction profle (with screws) and round tube (with tie-rods)
Operation single and double-acting
Materials see the table of materials on page 1/1.28.03
Type of mounting with front / rear flange, foot mounting, with front / rear / centre / swivel trunnion
Stroke min - max 10 ÷ 2500 mm
Operating temperature standard and low friction: 0°C ÷ 80°C (with dry air -20°C)
high temperatures (version W): 0°C ÷ 150°C (with dry air -20°C)
low temperatures (version Z): -40°C ÷ 60°C (with dry air -40°C)
low temperatures (version Y): -50°C ÷ 60°C (with dry air -50°C)
Operating pressure 1 ÷ 10 bar (standard, high and low temperatures)
0.1 ÷ 10 bar (low friction)
Speed 10 ÷ 1000 mm/sec, no load (standard, high and low temperatures)
5 ÷ 1000 mm/sec, no load (low friction)
Fluid fltered air in class 7.8.4, according to ISO 8573-1.
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
New