CATALOGUE release 8.8

137 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
1
Series 32 cylinders - Tandem and Multi-position MOVEMENT > CATALOGUE > Release 8.8
/1.31.01 1
MOVEMENT
Series 32 compact cylinders,
Tandem and Multi-position versions
Double-acting, magnetic
ø 25, 40, 63, 100 mm
Thanks to their great compactness Series 32 cylinders, Tandem and Multi-position, are
suitable to be installed within confined spaces and can be used with the same mounting
elements of other standard cylinders DIN/ISO 6431/VDMA 24562 (Series 60/61).
The Tandem version enables to obtain up to 2 times the thrust force of a normal cylinder
(standard traction force), while the Multi-position version can obtain up to three positions
with one cylinder only.
» » In compliance with
ISO 21287
» » Compact design
» » Wide range of models
available in different
diameters
GENERAL DATA
Construction compact profile
Operation double-acting, magnetic
Material body and end-blocks = anodized AL
rod = rolled stainless steel AISI 303
piston = anodized AL
rod seal, OR end-block and piston seal = PU
Mounting with threaded holes on the end blocks
flange – feet – trunnion
Strokes min. and max. (1)
Multi-position
Series 32F, 32M Ø 25 = 5-300 mm (dimension x2)
Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2)
Series 32F, 32M Ø 100 = 5-500 mm (dimension x2)
Strokes min. and max. (1)
Tandem
Series 32F, 32M Ø 25 = 5-80 mm
Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm
Operating temperature 0°C ÷ 80°C (with dry air -20°C)
Operating pressure 1 ÷ 10 bar
Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication
should never be interrupted.
Operating speed 10 ÷ 1000 mm\sec (without load)
(1) the minimum stroke for the use of the sensors is 10 mm.