CATALOGUE release 8.8

201 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
1
Series 97 stainless steel cylinders MOVEMENT > CATALOGUE > Release 8.8
/3.20.01 1
MOVEMENT
Series 97
stainless steel cylinders
Single- and double-acting, cushioned, magnetic.
ø 32, 40, 50, 63 mm
Series 97 stainless steel cylinders can be
used in critical applications where a high
level of corrosion resistance is required
(for example: off-shore, naval, food
industries).
These cylinders are normally equipped
with end-stroke cushioning which can
be adjusted through a screw on the end
block.
In order to quieten the impact of the
piston on the end block, these cylinders
are also equipped with mechanical
cushioning.
» » Clean design
» » Stainless steel AISI 304
» » Adjustable endstroke
cushioning
GENERAL DATA
Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring
Operation single-acting and double-acting
Materials end blocks, tube, rod in stainless steel AISI 304
rod seals in PU, piston seals in NBR
plastic guiding element, NSF H1-certified lubricant
Type of mounting threaded front and rear locking ring
pins on front cap ends
rear male hinge
articulated rear male hinge
rear female hinge
Stroke min-max 25 ÷ 800 mm
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure 1 ÷ 10 bar
Speed 10 ÷ 1000 mm/sec (without load)
Fluid Filtered air, without lubrication.
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.