211 / 1278
Products designed for industrial applications.
General terms and conditions for sale are available on
www.camozzi.com.1
Series QC cylinders
MOVEMENT >
CATALOGUE
>
Release 8.8
/4.05.01
1
MOVEMENT
Series QCT and QCB
cylinders with integrated guide
Double-acting, magnetic piston, guided
ø 20, 25, 32, 40, 50, 63 mm
These actuators, suitable for use in very limited space, are available in two versions.
QCT version: with sintered bronze bushes, suitable when the side loads applied to the
cylinder are high.
QCB version: with linear ball bearings, suitable for high precision and fast cycling
applications.
Both versions are equipped with fixed
cushioning to prevent direct impact with the
end covers. The design of the cylinder body
allows the mounting of the cylinder using
either top, bottom or side faces. Several “T”
shaped grooves in two faces allow sensors
to be fitted in a number of positions.
Out of standard strokes are available on
demand only.
»
»
Magnetic sensors can be
mounted on both sides
»
»
QCT: bronze
bushings version
»
»
QCB: ball bearing
guide version
»
»
Movement and
guidance in one unit
GENERAL DATA
Type of construction compact guided
QCT = sintered bronze bushes
QCB = linear ball bearings
Operation
double-acting
Materials
body = anodized AL
flange = zinc-plated steel
piston rod = rolled stainless steel AISI 303
QCT columns = rolled stainless steel 420B
QCB columns = hardened steel C50
seals = PU
Mounting
threaded and non-threaded holes in the body
Strokes min. max
see table
Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Speed
50 ÷ 500 mm/s
Operating pressure 1 ÷ 10 bar
Fluid
clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should
never be interrupted.