CATALOGUE release 8.8

Products designed for industrial applications.

General terms and conditions for sale are available on

www.camozzi.com.

Series QCTF - QCBF cylinders

CATALOGUE

/4.10.01

Release 8.8

MOVEMENT >

MOVEMENT

Series QCTF - QCBF

cylinders with integrated guide

Double-acting, magnetic, with double bearings and flanges

ø 20, 25, 32, 40 mm

These cylinders have been designed to be used in applications where space is limited.

Regarding the bearings, the Slide Units are available in two versions, one with double

sintered bronze bushes (Mod. QCTF) and the other with double linear ball bearings (Mod.

QCBF). The QCTF version would normally be selected when the side loads applied to

the slide unit are high. Mod. QCBF is suitable for fast cycles (less side load) and higher

precision.

The end cushioning is available in three

different variants:

A. fixed mechanical cushion (standard)

B. with two shock absorbers located on the

body

C. with one shock absorber located central

on the rear flange.

The versions B and C are suitable for

handling of higher mass forces and / or

when it is necessary to adjust the stroke.

Magnetic sensors can be

mounted on both sides

QCTF: bronze bushings

QCBF: ball bearing guide

Movement and guide

in one unit

GENERAL DATA

Type of construction

guided with double bearings and double flanges

QCTF = sintered bronze bushes

QCBF = linear ball bearings

Operation

double-acting

Materials

body = anodized AL

flanges = zinc-plated steel

piston rod = rolled stainless steel AISI

QCTF columns = rolled stainless steel 420B

QCBF columns = hardened steel C50

seals = PU

Mounting

threaded and non threaded holes in the body

Strokes min. max

(see table)

Operating temperature

0°C ÷ 80°C

(with dry air -20°C)

Speed

50 ÷ 500 mm/s

Stroke end cushioning Type A extended stroke - fixed mechanical cushioning

retracted stroke - fixed mechanical cushioning

we recommend preventing the piston from striking against the end covers

Stroke end cushioning Type B extended stroke - shock absorber

retracted stroke - shock absorber

Stroke end cushioning Type C extended stroke - shock absorber

retracted stroke - fixed mechanical cushioning

we recommend preventing the piston from striking against the end covers

Operating pressure

1 ÷ 10 bar

Fluid

clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication

should never be interrupted.