CATALOGUE release 8.8

280 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series CGP parallel grippers CATALOGUE
1
/7.15.01 1
> Release 8.8 MOVEMENT >
MOVEMENT
Series CGP
parallel grippers
Magnetic
Sizes: ø 10, 16, 20, 25, 32 mm
Series CGP parallel grippers are available in 5 different sizes.
The closing action of the gripper is generated from the cylinder’s thrust side, resulting in a
higher gripping force. The gripper is equipped with ring bearings in the sliding section for
higher durability. Gripper mod. CGP has mounting holes on three sides which provides
flexibility in installation.
The proximity switches can be inserted in
the U-shaped grooves on the body.
For an easier installation the gripper
can also be equipped with an optional
installation adaptor mod. C-CGP (female) or
L-CGP (male).
» » High durability
» » Compact design
» » High gripping force
GENERAL DATA
Model CGP-10 CGP-16 CGP-20 CGP-25 CGP-32
Bore sizes (mm) Ø 10 Ø 16 Ø 20 Ø 25 Ø 32
Type of operation double-acting
Operating pressure 1.5 ÷ 7 bar
Operating temperature 0°C ÷ 80°C
Max. operating frequency 180 cycles/min
Lubrication lever section - lubrication required on sliding section
Opening stroke (mm) Ø 10 = 4 Ø 16 = 8 Ø 20 = 12 Ø 25 = 14 Ø 32 =16
Theoritical holding force - opening (N) Ø 10 = 8 Ø 16 = 24 Ø 20 = 47 Ø 25 = 75 Ø 32 = 100
P = Related to a pressure of 5 bar with gripping point length 3 cm
Theoritical holding force - closing (N) Ø 10 = 5 Ø 16 = 8 Ø 25 = 35 Ø 25 = 60 Ø 32 = 85
P = Related to a pressure of 5 bar with gripping point length 3 cm
Length of max gripping point L (cm) 3,0 4,0 6,0 7,0 8,5
L = Related to a pressure of 5 bar
Weight(g) Ø 10 = 50 Ø 16 = 140 Ø 20 = 250 Ø 25 = 410 Ø 32 = 680
Port sizes M5 (CGP-10 M3)
Fluid filtered air, without lubrication.
In case lubricated air is used, it is recommended to use oil ISO VG32. Once applied, the lubrication should never
be interrupted.