CATALOGUE release 8.8

610 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series 3 Plug-In valve islands CATALOGUE
2
/3.30.04 2
> Release 8.8 CONTROL >
CONTROL
In the Multipole version the front position of the 25 pin Sub-D
connector makes the connection easier. The connectors with
pre-wired cable, which are available in different lengths and
with axial or radial orientation, simplify the electrical connection.
The Island can be configured up to a max. of 22 solenoids,
using monostable and bistable electrical modules, on 22 valve
positions, for example 22 monostable solenoid valves.
Thanks to the 2- or 3-position pneumatic modularity, diaphragms
and plates of supplementary supply, it is possible to create zones
with differentiated pressure. The Multipole version of Series 3
valve island can be connected by means of a Sub-D adapter.
In this way a standard Multipole Island can be inserted as
expansion in the subnet of the Fieldbus version.
MULTIPOLE VERSION AND MULTIPOLE WITH SUB-D ADAPTER
The Individual Fieldbus version of Series 3 can be interfaced
through a specific module with the Series CX multi-serial module
according to the different communication protocols (PROFIBUS-
DP, DeviceNet, CANopen, EtherNet/IP, EtherCAT, PROFINET).
Like the Multipole one, the Fieldbus version is able to create
islands with 22 coils on 22 valve positions adding a wide range of
electrical modules like digital/analog inputs/outputs of 0-10 V and
4-20 mA.
It is possible to insert Initial Subnet Modules in the version with
CPU module. These Modules enable to create a subnet with tree
structure or in series. On the subnet you can connect Expansion
Islands. These expansions have the same possibilities to use
the different electric modules, like digital and analog inputs and
outputs and further Initial Subnet Modules. Also with this version
the same rules as the CPU module and Multipole apply.
VERSIONS: FIELDBUS WITH CPU MODULE AND EXPANSION FIELDBUS