CATALOGUE release 8.8

607 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
2
Series 3 Plug-In valve islands CONTROL > CATALOGUE > Release 8.8
/3.30.01 2
CONTROL
Series 3 Plug-In valve islands,
Multipole and Fieldbus
Plug-In system for Series 3 solenoid valves, G1/8 port.
Valve functions: 2x3/2, 5/2 and 5/3-way CO CC CP.
Multipole with a 25-pin Sub-D connector.
It can interface with all major serial communication protocols.
The Multipole version of Series 3 Plug-In valve island can be easily installed thanks to
the front position of the Sub-D connector. The accessories of the new connection system
to the Series CX serial nets enable to handle up a multipole valve island by means of a
Sub-D connector or through a node integrated in the island.
The modularity of the electric and pneumatic parts allows to install up to a maximum of 22
solenoids on 22 valve positions.
The electric and pneumatic modules have
2- and 3-position modularity. To optimize
the signals distribution, electric modules
are available for monostable and bistable
valves. The pneumatic modularity enables
the creation of zones with differentiated
pressure.
Manuals, instruction sheets and
configuration files are available on the site
or by means
of the QR code indicated on the lable of the
product.
» » Flexible assembly through
monostable and bistable
2- and 3-position modules
» » Electrical connection and
front pneumatic outputs
» » Available protocols:
PROFIBUS-DP, DeviceNet,
CANopen, EtherNet/IP,
EtherCAT, PROFINET
GENERAL DATA
PNEUMATIC SECTION
Valve construction spool type with seals
Valve functions 5/2 - 5/3 CC - 5/3 CO - 5/3 CP - 2x3/2 NO - 2x3/2 NC - 1 3/2 NO + 1 3/2 NC
Materials AL body, stainless steel spool, NBR seals, technopolymer
Mounting through-out holes in the manifold
Ports valve = G1/8 - manifold = G3/8
Installation in any position
Operating temperature from 0°C to 60°C (with dry air at -20°C)
Nominal flow rate Qn 700 Nl/min
Nominal diameter 7 mm
Fluid Filtered air, class 7.4.4 according to ISO 8573-1-2010, without lubrication. If lubricated air is used, it is
recommended to use ISO VG32 oil, and to never interrupt the lubrication.
ELECTRICAL SECTION - MULTIPOLE VERSION
Max absorption 3 A
Type of connection Multipole 25-pin male Sub-D
Supply voltage 24 V DC +/- 10%
Max number of solenoids 22 on 22 valve positions
Signalling yellow LED
Duty cycle ED 100%
Protection class IP65
ELECTRICAL SECTION - FIELDBUS VERSION
General characteristics see the section about the Series CX multi-serial module (2.3.50)
Max absorption digital outputs/analogic inputs and outputs 3A
digital/analogic inputs 3 A
Voltage tolerances logic supply 24 V DC +/- 10%
power supply 24 V DC +/- 10%
New versions