CATALOGUE release 8.8

Products designed for industrial applications.

General terms and conditions for sale are available on

www.camozzi.com.

Series 6PF cylinders

MOVEMENT >

CATALOGUE

Release 8.8

/1.27.02

MOVEMENT

PNEUMATIC SECTION

Construction

inner tie-rods

Operation

double-acting low friction, not cushioned

Materials

see the table on the following page

Mountings

front and rear flange

foot mounts

front / rear / swivel / intermediate trunnion

Bores

50, 63, 80, 100, 125 mm

Strokes (min - max)

50 ÷ 500 mm (step 50 mm)

Operating Temperature

0°C ÷ 80°C (with dry air -20°C)

Operating pressure

0.1 ÷ 10 bar

Speed (min - max)

5 ÷ 1000 mm/sec (no load)

Max acceleration

10 m/sec²

Media

filtered air class 5.4.4 according to ISO 8573-1.

If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.

Linearity

0.1% of the stroke

Repeatability

0.03% of the stroke

Resolution

Infinite

Hysteresis

< di 0.5 mm

Vibration test according EN 60068-2-6

severity level 3

Shock test according EN 60068-2-27

severity level 2

ELECTRICAL SECTION

Electrical connection

male connector M12 4 poles

IP 67 (EN 60529)

Max input voltage

40 V (stroke 50 mm)

60 V (strokes from 100 to 500 mm)

Max recommended cursor current

< di 0,1 µA

Electrical resistance

5 kohm for strokes from 50 to 300 mm

10 kohm for strokes from 350 to 500 m

Tolerance on resistance

+/- 20%

Max dissipation (40°C)

1 W for stroke 50 mm

2 W for stroke 100 mm

3 W for strokes from 150 to 500 mm

Suitable end-stroke sensors

CST-332 (3 wires)

CST-362 (M8)

Suitable M12 connectors

CS-LF04HB (straight female connector 4 poles)

CS-LR04HB (right angle female connector 4 poles)

GENERAL AND TECHNICAL DATA