162
3
SHORT FORM CATALOGUE
>
Release 8.8
3
TREATMENT
Products designed for industrial applications.
General terms and conditions for sale are available on
www.camozzi.com.G1/8
G1/8
G1/8
G1/8
TREATMENT >
Accessories for the air treatment
Functioning condensate drains
Filtering elements
Semi-automatic manual drain; Automatic drain;
Depressurisation drain; Depressurisation drain, protected
Port 1/8 (without drain)
Functioning condensate drains for Series MX, MC and N
Semi-automatic manual drain (Type: 0 and 1)
Functioning: with the operator mechanism
turned clockwise, each time the pressure falls
below 0.3 bar, the draining of condensate will
be released; when resetting the pressure,
the drain will close again. The release can
also be carried out manually; when the bowl
is pressurised, the operator mechanism is
pushed upwards.
To avoid the discharge of condensate,
the operator mechanism should be turned
clockwise to completely close the drain.
Automatic drain (Type: 3)
Functioning: the presence of liquid inside
the bowl raises the float, thus opening the
exhaust valve.
Depressurisation drain (Type 5)
Solution similar to the Type 4 but requiring
a ΔP = 1 bar. Functioning: this version has a
filtering element which prevents any impurities
from clocking the exhaust hole.
Depressurisation drain (Type: 4)
Functioning: each time air is required from the
inlet, a slight difference of pressure is created
between the upper part and lower part of the
drain that rises, thus opening the exhaust valve.
Without drain (Type 8)
The solution with port G1/8 is used to
assemble the items to the bowl which is
realized with a through hole of ø3 mm and a
threaded port G1/8.