9 / 20
09
CPU Module
This serial module can interface with several protocols such
as Ethernet IP, EtherCat, ProfiNet, Powerlink, Profibus,
CanOpen, Devicenet, Modbus and Sercos.
It can be connected to various modules: digital inputs
with modularity at 8 and 4, digital outputs with 10-W
power each, input modules and analog outputs with 10-bit
resolution, direct interface modules for valve islands F, H
and 3, so as to provide a solution in a single block.
With the initial module of the subnet it’s also possible
to create extensions in a system or on a machine to control
more valve islands. In this way the CPU potentialities can
be fully exploited and the slave modules can be connected
on it in the SPI-Ethernet subnet. The CPU module has a
Bus IN connection and the Bus OUT of the main network,
which can handle a maximum of 1024 inputs and 1024
outputs, indicates its operating status via LEDs.
Bridge Module
This is an expansion module of the SPI-Ethernet subnet.
Like the CPU, it can be connected to the same modules,
like digital input and output modules, analog input and
output modules, direct interface modules for Series F,
H, 3 valve islands, as well as the initial module of the
subnet to further branch out or create new branches.
It has a Bus IN connection and the Bus OUT of the
SPI-Ethernet subnet indicates its operating status via
LEDs. In a SPI-Ethernet subnet it is possible to connect
as many Bridge modules as you like, up to a maximum
length of 100 meters of the entire branch.
Sub-D Adaptor Module 25 and 37 pin
This is an expansion module of the SPI-Ethernet subnet.
It can be used with all valve islands having a 25-pin
Sub-D connection (Series F, 3 and H) and with the
Series H module with 37-pin Sub-D 37 connection.
It has a Bus IN connection and the Bus OUT of the
SPI-Ethernet subnet indicates its operating status via
LEDs. The 25-pin Adaptor Module manages a fixed
number of 24 digital outs, whilst the 37-pin Adaptor
Module manages a fixed number of 32 digital outs.
Each out of both modules can deliver a maximum
of 3 W at 24 V DC. For PWM outputs it is possible
to set the value of the working frequency.
In a SPI-Ethernet subnet it is possible to connect as
many Adaptor modules as you like, up to a maximum
length of 100 meters of the entire branch.
NEWS 2015
|
CONTROL >
SERIES CX3
65
65
46.8
55
55
35.5
43.7
43.7
25.5
32.2
32.2
12
6.5
6.5
4.5
122
40.5
40.5
48.6
40.45
36.5
12.5
25 25 26 26 26 22.7
46.5
100
24
46.8
35.5
25.5
12
4.9
40.5
48.9
40
36.5
12.5
25
68
25 26 26 26 22.7
22.7
122
IN
OUT