CATALOGUE release 8.7

544 / 1144

Products designed for industrial applications.
General terms and conditions for sale are available on
2
Series 3 Plug-In valve islands CONTROL > CATALOGUE > Release 8.7
/3.05.01 2
CONTROL
Series 3 Plug-In
Valve Islands
Plug-In system for electro-pneumatically operated valves Series 3,
G1/8 port.
Valve functions: 2x3/2, 5/2 and 5/3-way CO CC CP
This Plug-In system, realized with electropneumatically operated valves Series 3, G1/8
port, is delivered completely assembled and tested. It allows the mounting of up to 22
valve positions (with two SUB-D 25 RIGHT and LEFT connectors).
The electrical part is based on printed circuit boards.
It is possible to combine the electrical
modules up to a maximum of 11 valve
positions for each side. The pneumatic part
is composed by initial, intermediate and
terminal modules.
The pneumatic modularity of 2 and 3
positions allows several configurations with
different pressure/exhaust zones.
See connectors in the section 2/3.25.
» » Flexible assembly
» » LEFT and/or RIGHT
electrical connection
» » Easy installation
GENERAL DATA AND ELECTRICAL CHARACTERISTICS
Valve construction spool type with seals
Valve functions 5/2 - 5/3 CC CO CP - 2x3/2 NO - 2x3/2 NC - 1 3/2 NO+1 3/2 NC
Materials AL body, stainless steel spool, NBR seals, technopolymer
Mounting through-out holes in the valve body
Ports valve = G1/8 - manifold = G3/8
Installation in any position
Operating temperature from 0°C to 60°C (with dry air at -20°C)
Nominal flow rate Qn 700 Nl/min
Nominal diameter 7 mm
Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil, and to never interrupt the
lubrication.
Signalling yellow LED
Voltage 24 V DC
Voltage tolerances +/- 10%
Duty cycle ED 100%
Protection class IP65
Power consumption 3W
Power supply connector SUB-D 25 poles IP65