CATALOGUE release 8.7

Products designed for industrial applications.

General terms and conditions for sale are available on

www.camozzi.com.

Series 3 Fieldbus valve islands

CATALOGUE

/3.07.01

Release 8.7

CONTROL >

CONTROL

Series 3 Fieldbus

Valve Islands

Fieldbus system combined with Series 3 solenoid valves, G1/8 ports.

Interface with: Profibus-DP, CANopen, DeviceNet. Valve functions:

2x3/2, 5/2 and 5/3-way CO CC CP

This Fieldbus system, realized with Series 3 solenoid valves (G1/8 ports) and delivered

completely assembled and tested, can accomodate up to 9 valve positions. Moreover, it

offers the possibility to manage up to 64 I/O.

It is possible to combine the pneumatic

electric modules by simply attaching them

to each other up to a maximum of 9 valve

positions. The pneumatic modularity of

2 and 3 positions offers the possibility to

create manifolds with different pressure/

exhaust supplies.

To check the suitable connectors see the

section 2/3.25.

Flexible assembly

Easy installation

Conform with standards

EN-61326-1 and EN-61010-1

GENERAL DATA AND ELECTRIC CHARACTERISTICS

Valve construction

spool type

Valve functions

5/2 - 5/3 CC CO CP - 2x3/2 NO - 2x3/2 NC - 1 3/2 NO+1 3/2 NC

Materials

AL body, stainless steel spool, NBR seals, technopolymer

Ports

Mounting

Installation

valve = G1/8 - manifold = G3/8

through holes in the valve body

in any position

Operating temperature

0-50 °C

Nominal flow rate

Qn 700 Nl/min

Nominal diameter

7 mm

Fluid

Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil and to never interrupt

the lubrication.

FieldBus protocol

3F8: Profibus-DP - 3R8: DeviceNet - 3G8: CANopen

Fieldbus signalling Led

3F8: 1 led green RUN, 1 led red DIA, 1 led red BF

3R8: 1 led green IO, 1 led red NS, 1 led red MS

3G8: 1 led green RUN, 1 led red DIA, 1 led red BF

Valve signalling Led

yellow led

Logical supply voltage

24VDC (-15% / + 20%)

Power supply voltage

24VDC (for the tolerance, consider the total loads of the connected inputs)

Duty cycle

ED 100%

Maximum number of nodes

3F8: 32/127 - 3R8: 64 - 3G8: 127

Maximum Baud rate

3F8: 12 Mbit/sec - 3R8: 500 Kbit/sec - 3G8: 1 Mbit/sec

Solenoid power consumption

Electric power supply connector

M12

Number of digital input / output

64 / 64

Maximum input / output absorption 1,5 A / 3 A (the total absorption must never exceed 3,5 A)

Protections

against overload and reverse polarity

Protection class

IP65

* The voltage range can change according to the range required by the connected external elements.