CATALOGUE release 8.8

351 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
1
Series 52 cylinders MOVEMENT > CATALOGUE > Release 8.8
/8.10.04 1
MOVEMENT
The end cushion regulating screw has to be regulated to obtain a
smooth movement at the end of stroke.
In those applications which have different values than the ones
stated in the diagram, external shock-absorbers have to be used.
The shock-absorber should be centrally located with respect to
the center of the mass.
The diagram applies for horizontal operations.
Correction coefficient, loads see page 1.8.10.03.
speed - coefficient:
0,2 m/s - 1
0,3 m/s - 0,75
0,4 m/s - 0,5
0,5 m/s - 0,4
0,75 m/s - 0,27
1 m/s - 0,2
END CUSHION DIAGRAM
DEFLECTION 0.5 mm
The charts have been made according to a max. deflection of 0.5
mm and 1 mm when a load (N) is applied.
The charts give the max distance between two supports in order
to stay within the deflection range given.
DEFLECTION 1 mm
The charts have been made according to a max. deflection of 0.5
mm and 1 mm when a load (N) is applied.
The charts give the max distance between two supports in order
to stay within the deflection range given.
LOADS ACCORDING TO SUPPORTS DISTANCE