CATALOGUE release 8.8

670 / 1278

Products designed for industrial applications.
General terms and conditions for sale are available on
Series HN valve islands CATALOGUE
2
/3.40.07 2
> Release 8.8 CONTROL >
CONTROL
The Multipole version can be connected in a quick and secure
way thanks to the electrical connection by means of a pre-wired
cable with 25 or 37 pins with in-line or angular connection. It is
possible to create zones with differentiated power supply and
with separate pressure/exhaust. Thanks to the subbases with
monostable board, islands can be realized up to maximum of 24
coils on 20 valve positions with the 25 pin connection and 32 coils
on 28 valve positions with the 37 pin connection.
The Multipole Island of both 25 pins and 37 pins can be
connected by means of a Sub-D adaptor, also of 25 or 37 pins.
In this way a standard Multipole Island can be inserted as
expansion in the subnet of the Serial version.
MULTIPOLE VERSION and MULTIPOLE WITH SUB-D ADAPTOR VERSION
Thanks to the Series CX Multi-serial node and a special direct
interface module with the pneumatic part of the island, it is
possible to interface the Series HN with the PROFIBUS-DP,
DeviceNet, CANopen, PROFINET, EtherCAT and EtherNet/IP
serial protocols. The Fieldbus version with CPU has the same
configuration rules of a Multipole island and can be equipped
with different electric modules like digital/analog inputs/outputs of
0-10V and 4-20mA, as well as initial subnet Modules.
It is possible to insert Initial Subnet Modules in the version with
CPU module. These Modules enable to create a subnet with tree
structure or in series. On the subnet you can connect Expansion
Islands. These expansions have the same possibilities to use
the different electric modules, like digital and analog inputs and
outputs and further Initial Subnet Modules. Also with this version
the same rules as the CPU module and Multipole apply.
VERSIONS: FIELDBUS WITH CPU MODULE AND EXPANSION FIELDBUS