14 / 226
Valve group
3-way/2-position, 5-way/3-position
Construction
Poppet type
Mounting
On consoles, control panels or cabinets: bulkhead design
Materials
Anodized body, Brass poppet gate, Buna-N seals
Threaded port sizes
M5 (10-32 UNF) thread, or 4 mm OD cartridge (5/32” OD tube connect)
Installation
Bulkhead, or single panel mount
Operating temperature
32°F - 175°F, (dry air necessary down to -4°F)
Fluid
Filtered air (25 micron or less recommended)
Lubricant
Not required. Otherwise, only oil compatible with Buna-N, (3° - 10° E) (approximate 32 centistokes viscosity),
ISOVG32 grade
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
4
m a n u a l v a l v e s
1
Dimensions in millimeters (mm)
Series 2
Cv = .06
Manually Operated Console Minivalves
3/2 and 5/3-way
Ports M5 (10-32 UNF)
Cartridge ø 4 mm (5/32“ O.D.)
The manually operated console valves come standard
with a 22 mm diameter mounting aperture which
consists of our own valves combined with manual
devices. This feature means that all the manual
devices, 22 in diameter, can be used. This series
of miniature valves has been specially designed to
satisfy all the application requirements of the controls
industry, with particular attention being paid to the
operating characteristics which are required from
these components:
— Low actuating force=6N (1.35 lbs.)
— Short operational stroke
— Small dimensions
— Speed and accuracy of signal
— Reduced air consumption
The versatility of the manual range is expandable. It
is possible to mount an electrical switch next to the
miniature valve. In this case, the base piece
Mod. 220-000 is required.
Note: Several additional push buttons, switches,
lighted operators and electrical controls are available
which integrate into this product line. Contact factory
for details, lead time and part number codes.
TECHNICAL SPECIFICATIONS
Cv = 0.6