178 / 226
f l ow con t ro l v a l v e s & a c c e s sor i e s
4
B S P / M E T R I C
b s p/me t r i c
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
168
Dimensions in millimeters (mm)
Right Angle Flow Control Valves
Series GSCU, GMCU, GSVU, GMVU,
GSCO, GMCO
Unidirectional and bidirectional flow control valves
Banjo flow controllers nominal diameters 1,5 - 3,5 - 5 mm
Ports M5, G1/8 and G1/4
These unidirectional and bidirectional
flow controllers have been designed as
small as possible to enable mounting
directly on valves or cylinders.
The flow regulation range is wide and
gradual, allowing the regulation to be
very accurate either at minimum or
maximum flow.
GENERAL DATA
Construction
needle - type
Valve group
unidirectional and bidirectional controller
Materials
body and screws M5 inox; 1/8 - 1/4 - 3/8 - 1/2 OT58 seals NBR
Mounting
by male threaded
Installation
in any position
Operating temperature 0°C - 80°C (with dry air -20°C)
Operating pressure
1 - 10 bar
Nominal pressure
6 bar
Nominal flow
see graph
Nominal diameter
M5 = 1.5 mm - G1/8 = 2 mm - G1/4 = 4 mm G3/8 = 7 mm - G1/2 = 12 mm
Fluid
filtered air