The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
Rodless and Guided/Twin-Bore Cylinders
4
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG
>
Release 8.5
RODLESS AND GUIDED/TWIN-BORE CYLINDERS
223
The end cushion regulating screw has to be regulated to obtain
a smooth movement at the end of stroke.
In those applications which have different values than the ones
stated in the diagram, external shock-absorbers have to be used.
The shock-absorber should be centrally located with respect to
the center of the mass.
The diagram applies for horizontal operations.
Correction coefficient, loads see page 1.8.10.03.
speed - coefficient:
0,2
m/s - 1
0,3
m/s - 0,75
0,4
m/s - 0,5
0,5
m/s - 0,4
0,75
m/s - 0,27
1
m/s - 0,2
DEFLECTION 0.5 mm
The charts have been made according to a max. deflection of
0.5
mm and 1 mm when a load (N) is applied.
The charts give the max distance between two supports in order
to stay within the deflection range given.
DEFLECTION 1 mm
The charts have been made according to a max. deflection of
0.5
mm and 1 mm when a load (N) is applied.
The charts give the max distance between two supports in order
to stay within the deflection range given.
END CUSHION DIAGRAM
LOADS ACCORDING TO SUPPORTS DISTANCE
